Ronex MP

Grease

RONEX™ MP is a lithium complex, mineral oil based multipurpose grease that can be used in a wide range of automotive and industrial applications. RONEX MP grease has good performance over a wide temperature range, and provides moderate load carrying, extreme pressure properties, water resistance, oxidation stability, and rust and corrosion protection. It is NLGI GC-LB qualified for use as a wheel bearing and chassis grease.

 

Features and Benefits

RONEX MP offers the following features and potential benefits:

•  Excellent resistance to high temperature degradation for long service life helping to extend grease lubrication intervals.

•  Enhanced extreme-pressure and anti-wear properties helps protect moving surfaces from wear; leading to extended component life.

•  Excellent high- and low-temperature performance helps minimize cold-weather dispensing problems.

•  Good water-resistance properties for reliable grease performance in hostile aqueous environments.

 

Applications

RONEX MP is a multi-purpose grease recommended by ExxonMobil for both industrial and automotive applications such as:

     •  Industrial - Plain and rolling element bearings, gears

     •  Automotive – Light Truck, Bus and Construction applications requiring an NLGI GC-LB qualified grease such as:

          •  Wheel Bearings

          •  Ball Joints

          •  Chassis lubrication points

 

Specifications and Approvals

This product has the following approvals:

Ford WSS-M1C267-A1

 

This product meets or exceeds the requirements of:

DIN 51825:2004-06 - KP 2 K -30 L

NLGI GC-LB

 

Properties and Specifications

Property

Grade

NLGI 2

Thickener Type

Lithium Complex

Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697

115

Color, Visual

Green

Copper Strip Corrosion, 24 h, 100 C, Rating, ASTM D4048

1A

Corrosion Preventive Properties, Rating, ASTM D1743

PASS

Dropping Point, °C, ASTM D2265

280

Four-Ball Extreme Pressure Test, Weld Point, kgf, ASTM D2596

250

Four-Ball Wear Test, Scar Diameter, mm, ASTM D2266

0.5

Penetration, 60X, 0.1 mm, ASTM D217

280

SKF Emcor Rust, distilled water, IP 220

0,0

Timken OK Load, lb, ASTM D2509

45

 

Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx