Mobil Delvac Elite 222 0W-30

Synthetic Heavy Duty Engine Oil

Mobil Delvac™ Elite 222 0W-30 is a synthetic, heavy-duty diesel engine oil that helps extend engine life and improve fuel economy in modern diesel engines. It is formulated using API CJ-4 additive technology and is excellent for light and heavy duty diesel engines including those with EGR and/or DPFs (Diesel particulate filters).


Equipment lubricant recommendations

Our Mobil Serv℠ Product Selector tool will help you identify lubricant(s) for your specific equipment.

Data sheets

Features and Benefits

FeaturesAdvantages and Potential Benefits
Excellent for light and heavy duty diesel engines including those with EGR and/or DPFs (Diesel particulate filters)One engine oil for mixed fleet operations
Exceptional resistance to viscosity breakdown Provides outstanding wear protection
Superb soot-handling performance Helps keep engines clean
Outstanding thermal and oxidation stability Excellent resistance to sludge build-up and high temperature deposits
Inherent stay-in-grade shear stabilityWear protection and reduced oil consumption; maintains viscosity in severe, high temperature service
Exceptional low temperature pumpabilityEasy engine start-up and wear protection



Mobil Delvac Elite 222 0W-30 is recommended for use in 4-stroke diesel engines, including modern low emission engines with Exhaust Gas Recirculation (EGR), After Treatment systems with Diesel Particulate Filters (DPF’s) and Diesel Oxidation Catalysts (DOC’s). These applications include the following:

  • On-highway engines operating in both high speed/high load and stop-and-go conditions
  • Off-highway engines operating in low speed/heavy load conditions
  • Refrigeration units
  • May also be used in gasoline engines requiring API SM oils and mixed fleets


Specifications and Approvals

Mobil Delvac Elite 222 0W-30 is recommended by Imperial Oil for use in applications requiring: 
API CJ-4, CI-4 PLUS, CI-4, CH-4X
CUMMINS CES 20081, 20076X


Typical Properties

Mobil Delvac Elite 222 0W-30 
SAE Grade 0W-30
Viscosity, ASTM D 445 
     cSt @ 40ºC 69
     cSt @ 100ºC12.2
Viscosity Index, ASTM D 2270176
Sulfated Ash, wt%, ASTM D 8740.99
Total Base #, mg KOH/g, ASTM D 28967.7
Pour Point, ºC, ASTM D 97-45
Flash Point, ºC, ASTM D 92215
Density @ 15ºC kg/l, ASTM D 40520.842


Health and Safety

The products described on this data sheet are manufactured from high quality petroleum base stocks, carefully blended with selected additives. As with all petroleum products, good personal hygiene and careful handling should always be practiced. Avoid prolonged contact to skin, splashing into the eyes, ingestion or vapour inhalation. Please refer to the Material Safety Data Sheet for further information.

Note: The products described on this data sheet are NOT controlled under Canadian WHMIS legislation.