Argon EP greases are high quality, shear stable products suitable for use in both plain and anti-friction bearings lubricated by an automatic dispensing system. Argon EP greases are useful over an operating temperature range of 0°C to 95°C and are widely used to lubricate mining equipment, bolt and nut formers, vane spindles of hydraulic turbines and a wide range of other machinery serviced by automatic dispensing equipment. Argon EP greases contain an extreme pressure additive and are recommended where bearings are shock loaded or operating under heavy load conditions.

 

Equipment lubricant recommendations

Our Mobil Serv℠ Product Selector tool will help you identify lubricant(s) for your specific equipment.

Data sheets

Typical Properties

 Argon EP 0 Argon EP 1
Soap Type Ca Ca
Worked Penetration @25° C 350315
Base Oil Viscosity, cSt @ 40° C 175175
Dropping Point °C 135135
Timken OK Load 2121

The values shown above are representative of current production. Some are controlled by manufacturing and performance specifications while others are not. All may vary within modest ranges.

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended applications and the recommendations provided in the Material Safety Data Sheet. MSDS's are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.